Installation of Auto Care SpeckDeck using Rhino Grip Double-Side Tape

Step One

Step One

Roll out SpeckDeck in desired location.

Step Two

Step Two

Clean floor where tape is to be applied with rubbing alcohol.

Apply Rhino Tape to floor, 1/2 way under the SpeckDeck, as shown above

Step Three

Step Three

Roll out the next piece of SpeckDeck aligning the sides together.

Step Four

Step Four

Fold back one piece of SpeckDeck and peel off paper backing.

Step Five

Step Five

Starting at the front edge, slowly fold SpeckDeck onto tape,

positioning edges as close together as possible. Press firmly into place.

Step Six

Step Six

Fold back front edge, clean floor with rubbing alcohol and apply tape to floor.

Step Seven

Step Seven

Remove paper backing and fold SpeckDeck onto tape, pressing firmly into place.